1. Manuals
  2. Brands
  3. Vulcan-Hart Manuals
  4. Commercial Food Equipment
  5. VGCTS16
  6. Service manual

Vulcan-Hart VGCTS16 Service Manual

Round countertop tilting braising pans 16 gallon gas and electric
Hide thumbs Also See for VGCTS16:
Table of Contents

Advertisement

Quick Links

Download this manual
This Manual is prepared for the use of trained Vulcan Service
Technicians and should not be used by those not properly
qualified.
This manual is not intended to be all encompassing. If you have
not attended a Vulcan Service School for this product, you should
read, in its entirety, the repair procedure you wish to perform to
determine if you have the necessary tools, instruments and skills
required to perform the procedure. Procedures for which you do
not have the necessary tools, instruments and skills should be
performed by a trained Vulcan Service Technician.
The reproduction, transfer, sale or other use of this Manual,
without the express written consent of Vulcan, is prohibited.
This manual has been provided to you by ITW Food Equipment
Group LLC ("ITW FEG") without charge and remains the property
of ITW FEG, and by accepting this manual you agree that you will
return it to ITW FEG promptly upon its request for such return at
any time in the future.
A product of Vulcan-Hart
SERVICE MANUAL
ROUND COUNTERTOP TILTING
BRAISING PANS (16 GALLON)
Gas and Electric
VGCTS16
VECTS16
- NOTICE -
3600 North Point Blvd Baltimore, MD 21222
ML-114827
ML-114825
F24643 (1217)

Advertisement

Table of Contents
loading

Related Manuals for Vulcan-Hart VGCTS16

Summary of Contents for Vulcan-Hart VGCTS16

  • Page 1 ITW FEG, and by accepting this manual you agree that you will return it to ITW FEG promptly upon its request for such return at any time in the future. A product of Vulcan-Hart 3600 North Point Blvd Baltimore, MD 21222 F24643 (1217)

  • Page 2: Table Of Contents

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric TABLE OF CONTENTS GENERAL ....................3 INTRODUCTION .

  • Page 3: General

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - GENERAL GENERAL INTRODUCTION SPECIFICATIONS The Vulcan round tilting braising pan (skillet) is a Electric Braising Pan versatile piece of cooking equipment. It can be used Amperage to stew, simmer, sear, pan fry, grill or saute food Total products under an evenly distributed heating surface.

  • Page 4: Tools

    Load (Inches W.C) Model (Watts) 120V Nat. Prop. Nat. Prop. Recommend Min Recommend Min Max 60Hz VGCTS16 30,000 30,000 10.0 11.0 11.0 14.0 TOOLS Standard • Standard set of hand tools. • VOM with minimum of NFPA-70E CAT III 600V, UL/CSA/TUV listed.

  • Page 5: Removal And Replacement Of Parts

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - REMOVAL AND REPLACEMENT OF PARTS REMOVAL AND REPLACEMENT OF PARTS COMPONENT LOCATION Refer to the appropriate illustration for component location and identity. Only major components are covered by a replacement procedure.
  • Page 6 ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - REMOVAL AND REPLACEMENT OF PARTS Illustration - Electric Model Fig. 3 F24643 (1217) Page 6 of 26...
  • Page 7 ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - REMOVAL AND REPLACEMENT OF PARTS Illustration - Gas Model Fig. 4 Page 7 of 26 F24643 (1217)

  • Page 8: Right And Left Console Cover

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - REMOVAL AND REPLACEMENT OF PARTS Pull out the right side access panel to expose the RIGHT AND LEFT CONSOLE compartment controls. COVER Loosen the two set screws from the temperature dial and pull off the dial.

  • Page 9: Thermostat (Electric Model)

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - REMOVAL AND REPLACEMENT OF PARTS THERMOSTAT (Electric Model) Disconnect the electrical power to the machine and follow lockout / tagout procedures. There may be multiple circuits. Be sure all circuits are disconnected.

  • Page 10: Heater Contactors

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - REMOVAL AND REPLACEMENT OF PARTS Disconnect heater lead wires, and mark HEATER CONTACTORS accordingly for proper replacement. Disconnect the electrical power to the machine and follow lockout / tagout procedures. There may be multiple circuits.

  • Page 11: Heating Elements

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - REMOVAL AND REPLACEMENT OF PARTS HEATING ELEMENTS Disconnect the electrical power to the machine and follow lockout / tagout procedures. There may be multiple circuits. Be sure all circuits are disconnected.
  • Page 12 ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - REMOVAL AND REPLACEMENT OF PARTS Shut off the gas before servicing the unit and follow lockout / tagout procedures. All gas joints disturbed during servicing must be checked for leaks. Check with a soap and water solution (bubbles).

  • Page 13: Bearings

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - REMOVAL AND REPLACEMENT OF PARTS Remove the bearing to be replaced from the support member. NOTE: Check condition of bearing on opposite side, and replace if necessary. Replace with a new bearing, and reverse procedure to install.

  • Page 14: Service Procedures And Adjustments

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - SERVICE PROCEDURES AND ADJUSTMENTS SERVICE PROCEDURES AND ADJUSTMENTS Certain procedures in this section require electrical test or measurements while power is applied to the machine. Exercise extreme caution at all times and follow Arc Flash procedures. If test points are not easily accessible, disconnect power and follow Lockout/Tagout procedures, attach test equipment and reapply power to test.

  • Page 15: Hot Surface Ignitor (Gas Model)

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - SERVICE PROCEDURES AND ADJUSTMENTS Perform a visual check to determine if the flame sense probe is in the upper portion of flame. If the probe is bent or not in the upper portion of the flame, then check alignment and adjust as necessary.

  • Page 16: Temperature Controller And Potentiometer Test (Gas Model)

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - SERVICE PROCEDURES AND ADJUSTMENTS TEMPERATURE CONTROLLER AND POTENTIOMETER TEST (Gas Model) Certain procedures in this section require electrical test or measurements while power is applied to the machine. Exercise extreme caution at all times.

  • Page 17: Heating Elements (Electric Model)

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - SERVICE PROCEDURES AND ADJUSTMENTS Temperature Setting Approximate DC (°F) Voltage If the voltage measurements agree with those listed in the table, and the increase in voltage was smooth without drops or spikes, then potentiometer is functioning properly.

  • Page 18: Electrical Operation

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - ELECTRICAL OPERATION ELECTRICAL OPERATION COMPONENT FUNCTION Heater Contactors ..Controls power to heating elements (electric models only). Heating Elements Heat the braising pan cooking surface (electric models only). (3) .
  • Page 19 ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - ELECTRICAL OPERATION Temperature light goes out. Power from L1 (120VAC) is then supplied to the other side of the temperature light and L1 voltage is removed from one side of the step-down transformer (120VAC to contactor coils.

  • Page 20: Schematic Diagrams

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - ELECTRICAL OPERATION SCHEMATIC DIAGRAMS Electric Model Fig. 23 F24643 (1217) Page 20 of 26...
  • Page 21 ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - ELECTRICAL OPERATION Gas Model Fig. 24 Page 21 of 26 F24643 (1217)

  • Page 22: Wiring Diagrams

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - ELECTRICAL OPERATION WIRING DIAGRAMS Electric Model (208/240V) Fig. 25 F24643 (1217) Page 22 of 26...
  • Page 23 ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - ELECTRICAL OPERATION Electric Model (480V) Fig. 26 Page 23 of 26 F24643 (1217)
  • Page 24 ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - ELECTRICAL OPERATION Gas Model Fig. 27 F24643 (1217) Page 24 of 26...

  • Page 25: Troubleshooting

    ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - TROUBLESHOOTING TROUBLESHOOTING ALL MODELS Certain procedures in this section require electrical test or measurements while power is applied to the machine. Exercise extreme caution at all times and follow Arc Flash procedures. If test points are not easily accessible, disconnect power and follow Lockout/Tagout procedures, attach test equipment and reapply power to test.
  • Page 26 ROUND COUNTERTOP TILTING BRAISING PANS (16 GALLON) Gas and Electric - TROUBLESHOOTING SYMPTOM POSSIBLE CAUSES Gas not on. Pan not down to close limit switch. Unit not properly grounded, and/or polarity of incoming power is incorrect. Low incoming gas pressure. Gas solenoid valve malfunction.

This manual is also suitable for:

Vects16Ml-114827Ml-114825

Table of Contents