Brother DCP-1510 Service Manual page 149

4. 4. IF IF Y
POWER POWER SUPPL
<What to do after replacement> <What to
• • Resett
(1 (1) ) On
(2) Create (2)
(3) Dow (3)
(4) Mainte (4)
(5) Irregul (5)
4.1 4.1 Resett Res
Power Supply PCB Power Supply PCB
The irregular power supply detection counter increases when the machine detects irregular The irregular power supply detection counter increases when the machine detects irregular
power supply ly. . power supp
When the counter reaches the limit and the irregular power supply detection error is When the counter reaches the limit and the irregular power supply detection error is
displayed, replace the low voltage power supply PCB unit, which may have been damaged displayed, replace the low voltage power supply PCB unit, which may have been damaged
by irregular power supply, and reset the irregular power supply detection counter. In this by irregular power supply, and reset the irregular power
case, if the same power supply is used, the same error may occur even when the low case, if the same power supply is used, t
power supply PCB unit is replaced. Ask the user to review the installation environment to power supply PCB unit is replaced. Ask the user to review the installation environment to
avoid the same error occurring again. avoid the same error occurring again.
Refer to "1.3.27 Reset irregular power supply detection counter of low voltage power supply Refer to
PCB (function code: PCB (function code: 88)"
counter. counter.
YOU R OU REP EPLA LACE
SUPPLY PCB
do after replacement>
Resetting irregul ing irregular power supply det ar power supply detection coun
(function code: 88) (function code: 88)
What you need to prepare What you need to prepare
One e US USB B ca cabl ble e
Create a tempor a temporary fol ary folder on th der on the C drive
Downlo nload ut ad utili ility (F ty (FILED ILEDG32
Copy this file into the temporary folder created on the C drive. Copy this file into the temporary folder created on the C drive.
Maintenance nance driver driver (Mainte (MaintenanceD
When the maintenance driver is not installed on the computer, copy this file into When the maintenance driver
temporary folder created on the C drive, and extract the copied file. temporary folder created on the C drive, and extract the copied file.
Irregular powe ar power suppl r supply detect y detection cou
etting I ing Irre rregul gular P ar Powe ower Sup
"1.3.27 Reset irregular power supply detection counter of low voltage power supply
88)" in this Chapter 4 in this Chapter
3-12 3-12
CE THE L TH E LOW OW
Y PCB UNIT UNIT
ection counter of low voltage pow ter of low voltage power supply PCB
e C drive of the c of the computer ( omputer (Window
G32.EXE .EXE) )
nanceDriver river.zip) .zip)
is not installed on the computer, copy this file into the
ion counter PJL f nter PJL file (SQ ile (SQWA
r Supply D ply Dete etecti ction Co on Count
he same error may occur even when the low voltage
4 to reset the irregular power supply detection to reset the irregular power supply detection
VOL VO L T T AG AGE E
er supply PCB
® ®
Windows s XP or later). XP or later).
WAVE.PJL) VE.PJL)
unter of L er of Low V ow Volt oltage
supply detection counter. In this
Confidential Confidential
the
age
voltage