Brother DCP-1510 Service Manual page 125

7 7 . . 1 1 2 2 S S i i d d e e c c o o v v e e r r L L
(1) (1) Open the pu
(2) (2) Remov
(3) Remove th (3)
Hook PCB harness Hook PCB harness
(only for models with handset) (only for models with handset)
Taptite bind B M4x12 Taptite bind B M4x12
Hook Hook
bushings bushings
Open the pull-arm a ll-arm about 135 de bout 135 degrees and p
Remove the three t e the three taptite b aptite bind B M4x12 s
side cover L. Pull out the three tabs and release the four hooks on the bottom. Disconnect side cover L. Pull out the three tabs and release the four hooks on the bottom. Disconnect
the hook PCB harness from the hook harness (only for models with handset), and remove the hook PCB harness from the hook harness (only for models with handset), and remove
the side cover L from the machine. the side cover L from the machine.
Remove the tapti e taptite bind B M4x te bind B M4x12 screw
remove it from the side cover L. remove it from the side cover L.
Hook harness Hook harness
(only for models (only for models
with handset) with handset)
Pull-arm Pull-arm 135° 135°
Tabs Tabs
2-37 2-37
grees and pull it up to re ull it up to remove it fro
ind B M4x12 screws. R crews. Release th elease the three hoo
12 screw, and relea , and release the hook o
Taptite bind B Taptite bind B
M4x12 M4x12
Dress cover L Dress cover L
Hook Hook
Hooks Hooks
Fig. 2-34 Fig. 2-34
move it from the side co m the side cover L.
e three hook bushing k bushings of the
se the hook of the dress co f the dress cover L to
Taptite bind B M4x12 Taptite bind B M4x12
Hook bushing Hook bushing
Tab Tab
Side cover L Side cover L
Confidential Confidential
ver L.
s of the
ver L to