Brother DCP-1510 Service Manual page 133

7. 7.19 19 Mo Moto tor e
(1) (1) Disco
(2) Releas (2)
Harness routing: Refer to Harness routing: Refer to "
sensor PCB ASSY / pick-up solenoid sensor PCB ASSY / pick-up
Assembling Note: Assembling Note:
• • Fold the moto
To be connected To be connected
to motor encoder to motor encoder
PCB ASSY PCB ASSY
E E l l e e c c t t r r o o d d e e p p l l a a n n e e
r enc ncod oder er PC PCB A B ASS SSY Y
Disconnect al nnect all harness l harnesses and flat c es and flat cable from t
Note: Note:
• • After dis After disconnec connecting the flat ca ting the flat cable, chec
short-circuited. When connecting the flat cable, do not insert it at an angle. After short-circuited. When connecting the flat cable, do not insert it at an angle. After
insertion, check that the cable is not at an angle. insertion, check that the cable is not at an angle.
Release the two e the two hooks t hooks to remove o remove the mot
Hooks Hooks
Main motor harness Main motor harness
" 1 1 1 1
solenoid"
Fold the motor encoder PCB fla r encoder PCB flat cable as show
Mountain fold Mountain fold
Valley fold Valley fold
80 mm 80 mm
45° 45°
2-45 2-45
able from the motor en he motor encoder PCB ASS
ble, check that the cable is not da k that the cable is not damaged at the end or
the motor encod or encoder PCB ASSY f
Fig. 2-44 Fig. 2-44
. . Laser unit / motor encoder PCB ASSY Laser unit / motor encoder PCB
" . .
t cable as shown in the figure bel n in the figure below
4 4 5 5 ° °
Motor encoder PCB flat cable Motor encoder PCB flat cable
Fig. 2-45 Fig. 2-45
coder PCB ASSY Y . .
maged at the end or
er PCB ASSY from the rom the machin machine. e.
New toner sensor PCB harness New toner sensor PCB harness
Pick-up solenoid harness Pick-up solenoid harness
Motor encoder Motor encoder
PCB flat cable PCB flat cable
Motor encoder PCB ASSY Motor encoder PCB ASSY
ASSY" " and " and " 14. 14 . New toner New toner
ow. .
122 mm 122 mm
4 4 5 5 ° °
E E l l e e c c t t r r o o d d e e p p l l a a n n e e
Confidential Confidential
15 mm 15 mm
To be connected to To be connected to
main PCB ASSY main PCB ASSY