Brother DCP-1510 Service Manual page 109

(4) Rem (4)
Assembling Note: Assembling Note:
• • When removing the document cover, the spring could come off by removing the screw. When
(5) Relea (5)
Lower document chute ASSY Lower document chute ASSY
(6) Rem (6)
(7) Lift an (7)
(8) Peel (8)
Remove th ove the four t e four tapti aptite bin te bind B M3x10 s
When removing the document cover, the spring could come off by removing the screw. When
reassembling the document cover, make sure that the spring is assembled. reassembling the document cover, make sure that the spring is assembled.
Release the hook t se the hook tray and the t ray and the three hook
document chute document chute ASSY ASSY. .
Hook Hook
Document cover Document cover
Hook tray Hook tray
Remove th ove the tap e taptit tite bind B M3 e bind B M3x10 sc
Lift and pull the f d pull the front sid ront side of the reinf e of the reinforcing p
Peel it wi it with th th the doc e document ument sponge
Document sponge Document sponge
Taptite bind B M3x10 Taptite bind B M3x10
2-21 2-21
d B M3x10 scre crews. ws.
hree hooks to remov s to remove the docume
Taptite bind B M3x10 Taptite bind B M3x10
Hooks Hooks
Fig. 2-14 Fig. 2-14
x10 screw rew. .
orcing plate to pul late to pull out it fro
sponge to th to the lef e left. t.
Reinforcing plate Reinforcing plate
Fig. 2-15 Fig. 2-15
e the document cover fr nt cover from the lowe om the lower r
Taptite bind B Taptite bind B
M3x10 M3x10
l out it from the hole. m the hole.
Hole Hole
Confidential Confidential
Spring Spring