Brother DCP-1510 Service Manual page 112

7. 7.4. 4.1 1 CI CIS u
(1) Remov (1)
(2) (2) Remov
(3) (3) Open th
(4) (4) Disco
(5) (5) Relea
Taptite bind B M4x12 Taptite bind B M4x12
(only for models without (only for models without
ADF unit) ADF unit)
CIS roller holder R ASSY CIS roller holder R ASSY
CIS flat cable CIS flat cable
ADF bevel ADF bevel
gear ASSY gear ASSY
Harness routing: Refer to " Harness routing: Refer to
Assembling Note: Assembling Note:
• • After
• • When remov
S uni nit / t / CI CIS f S fla lat c t cab able le
Remove the two (fo e the two (four for mode ur for models witho
the scanner top cover ASSY from the document scanner unit. the scanner top cover ASSY from the document scanner unit.
Remove the CIS rol e the CIS roller hold ler holder L ASSY and the CI
Open the CIS unit 13 e CIS unit 130 degrees a 0 degrees and slide it t
remove it from the CIS carriage ASSY. remove it from the CIS carriage ASSY.
Disconnect nnect the C the CIS fla IS flat cab t cable fro
Release the CIS fla se the CIS flat cable fr t cable from the secu
scanner unit. scanner unit.
130° 130°
CIS unit CIS unit
CIS carriage ASSY CIS carriage ASSY
" 6 6 . .
After the the replac replacement, ement, refer refer to to "3.
OR CIS UNIT" in chapter OR CIS UNIT" in chapter 3
When removing the scann ing the scanner top cover
assembling the scanner top cover, make sure that the ADF bevel gear ASSY is assembling the scanner top cover, make sure that the ADF bevel gear ASSY is
assembled. assembled.
2-24 2-24
ls without ADF unit) t ut ADF unit) taptite b
er L ASSY and the CIS roller ho S roller holder R ASSY fro
nd slide it to the direc o the directions of th
le from the m the CIS u CIS unit. nit.
om the securing fix ring fixtures, an tures, and remove i
3a 3a
3b 3b
Fig. 2-18 Fig. 2-18
Document scanner Document scanner unit unit" " and " and
"3. IF YOU IF YOU REPLACE THE DOCUMENT REPLACE THE DOCUMENT
3 to enter the adjusted value of the laser unit. to enter the adjusted value of the laser unit.
er top cover, ADF bevel gear ASSY wi , ADF bevel gear ASSY will come off
aptite bind B M4x12 s ind B M4x12 screws to r crews to remove
lder R ASSY from the CIS uni m the CIS unit. t.
tions of the arrow 3a a e arrow 3a and 3b to nd 3b to
d remove it from the do t from the document
Taptite bind B M4x12 Taptite bind B M4x12
Scanner top Scanner top
cover ASSY cover ASSY
CIS flat cable CIS flat cable
CIS roller holder L ASSY CIS roller holder L ASSY
Document scanner unit Document scanner unit
" 7 7 . . Panel flat Panel flat cable cable" " . .
SCANNER SCANNER UNIT
ll come off. When . When
Confidential Confidential
emove
cument
UNIT