Brother DCP-1510 Service Manual page 113

Assembling Note: Assembling Note:
• • When reconn
 
CIS carriage ASSY CIS carriage ASSY
Attach within the metal stamping mark Attach within the metal stamping mark
 
Electrode plane Electrode plane
To be connected To be connected
to CIS unit to CIS unit
18 mm 18 mm
35 mm 35 mm
Mountain fold Mountain fold
Valley fold Valley fold
When reconnecting the CIS flat cabl ecting the CIS flat cable, attach and fold the doub
the figure below. the figure below.
Location of the double-sided tape Location of the double-sided tape
Double-sided tape Double-sided tape
Double-sided tape Double-sided tape
How to fold the CIS flat cable How to fold the CIS flat cable
53 mm 53 mm 128 mm 128 mm
2-25 2-25
e, attach and fold the double-sid
Attach within the metal stamping mark Attach within the metal stamping mark
Attach within the frame Attach within the frame
Document scanner unit Document scanner unit
Fig. 2-19 Fig. 2-19
Insulation tape Insulation tape
45° 45°
182 mm 182 mm
Fig. 2-20 Fig. 2-20
le-sided tape as shown in ed tape as shown in
Double-sided tape Double-sided tape
Electrode plane Electrode plane
To be connected to To be connected to
45° 45°
main PCB ASSY main PCB ASSY
110 mm 110 mm
Confidential Confidential