Brother DCP-1510 Service Manual page 136

7. 7.22 22 Ne New t
Note: Note:
• • Make sure that the fuser unit is at room temperature to avoid the frame deforming due to heat.
(1) (1) Turn
(2) (2) Remove t
(3) (3) Rem
(4) Remove (4)
(5) Release the hook, and remove the drive sub ASSY from the machine by bending the chute earth (5)
(6) Relea (6)
(7) (7) Relea
Develop gear Develop gear
Hook Hook
Drive sub ASSY Drive sub ASSY
Chute earth Chute earth
spring spring
w ton oner er se sens nsor or PC PCB A B ASS
Make sure that the fuser unit is at room temperature to avoid the frame deforming due to heat.
Turn the mac the machine so hine so that the that the left s
Remove the plate up s he plate up spring fro pring from the plat
Note: Note:
• • Be caref Be careful not ul not to unc to uncoil th oil the spri
Remove th ove the four t e four tapti aptite bin te bind B M4x12 s
Remove the pap the paper feed F er feed FG sprin
Release the hook, and remove the drive sub ASSY from the machine by bending the chute earth
spring inward. Remove the motor drive belt from the develop gear of the drive sub ASSY. spring inward. Remove the motor drive belt from the develop gear of the drive sub ASSY.
Release the n se the new toner s ew toner sensor PC
Release the tw se the two hooks o hooks to remo to remove the ne
Motor drive Motor drive
belt belt
Paper feed FG spring Paper feed FG spring
2-48 2-48
SSY Y
left side of th ide of the machin e machine faces u
m the plate up plate an e up plate and the drive s
e spring. ng.
d B M4x12 scre crews. ws.
G spring from th g from the drive e drive sub ASSY sub ASSY . .
ensor PCB harness B harness from the from the securi
ve the new toner s w toner sensor PC ensor PCB ASSY
T T aptite bind aptite bind B M4x12 B M4x12
Drive sub ASSY Drive sub ASSY
Drive sub ASSY Drive sub ASSY
Fig. 2-48 Fig. 2-48
e faces upward. pward.
d the drive sub ASSY ub ASSY. .
securing fixtu ng fixtures. res.
B ASSY. .
Plate up spring Plate up spring
New toner sensor New toner sensor
PCB ASSY PCB ASSY
New toner New toner
sensor PCB sensor PCB
harness harness
Plate up plate Plate up plate
Plate up spring Plate up spring
Plate up plate Plate up plate
Confidential Confidential
Hooks Hooks