Brother DCP-1510 Service Manual page 119

7. 7.8 8 Mo Mode
(1) Disco (1)
(2) (2) Remov
(3) (3) Remov
(4) (4) Remov
(5) (5) Remove
(6) (6) Remov
Upper modem Upper modem
shield plate shield plate
Taptite cup S M3x8 SR Taptite cup S M3x8 SR
Taptite pan B M4x12 DA Taptite pan B M4x12 DA
Taptite cup S Taptite cup S
M3x8 SR "A" M3x8 SR "A"
Lower modem Lower modem
shield plate shield plate
Screw pan (S/P washer) Screw pan (S/P washer)
M3.5x6 M3.5x6
Assembling Note: Assembling Note:
• • Be caref
• • Secure the mai
• • Make sure to att
dem PC m PCB A B ASS SSY (o Y (onl nly fo
Disconnect th nnect the modem e modem PCB flat PCB flat cable f
Note: Note:
• • After dis After disconnec connecting the flat ca ting the flat cable, chec
short-circuited. When connecting the flat cable, do not insert it at an angle. After short-circuited. When connecting the flat cable, do not insert it at an angle. After
insertion, check that the cable is not at an angle. insertion, check that the cable is not at an angle.
Remove the tapt e the taptite pan B M4 ite pan B M4x12 DA scr
remove the upper modem shield plate from the machine. remove the upper modem shield plate from the machine.
Remove the two scr e the two screw pan (S/ ew pan (S/P washer) M
shield plate from the machine. shield plate from the machine.
Remove the screw p e the screw pan (S/P wash an (S/P washer) M3.5x
remove the SDAA shield plate from the machine. remove the SDAA shield plate from the machine.
Remove the SDA the SDAA shiel A shield cove d cover HS fr
Remove the two ta e the two taptite cu ptite cup S M3x8 SR scr
SDAA insulation sheet from the SDAA shield plate. SDAA insulation sheet from the SDAA shield plate.
Main shield plate Main shield plate
Upper modem Upper modem
shield plate shield plate
Taptite bind B M4x12 Taptite bind B M4x12
Screw pan (S/P washer) M3.5x6 Screw pan (S/P washer) M3.5x6
Be careful not t ul not to assemb o assemble wit le with wrong s
Secure the main PCB insula n PCB insulation sheet and the upper mo
Make sure to attach insulation sheet. Failure ach insulation sheet. Failure to attach the insulat
or electrical shock. or electrical shock.
2-31 2-31
y for m r mod odel els wi s with m th mod
cable from the ma rom the main PCB ASSY
ble, check that the cable is not dam k that the cable is not damaged at its end or
x12 DA screw and the t ew and the taptite cu
P washer) M3.5x6 sc 3.5x6 screws to rem
er) M3.5x6 and the ta 6 and the taptite bin
r HS from the om the SDAA sh SDAA shield p
p S M3x8 SR screws to rem ews to remove the mod
Modem PCB Modem PCB
flat cable flat cable
Modem PCB ASSY Modem PCB ASSY
SDAA shield cover HS SDAA shield cover HS
Fig. 2-27 Fig. 2-27
h wrong screws crews. .
tion sheet and the upper modem shield plat
to attach the insulation sheet can result i
odem em PC PCB) B)
in PCB ASSY . .
aged at its end or
aptite cup S M3x8 SR scr p S M3x8 SR screw to
rews to remove the lo ove the lower modem wer modem
ptite bind B M4x12 sc d B M4x12 screw to
ield plate. late.
ove the modem PCB ASSY and th em PCB ASSY and the e
Main PCB Main PCB
Main PCB ASSY Main PCB ASSY
insulation sheet insulation sheet
SDAA shield plate SDAA shield plate
SDAA insulation sheet SDAA insulation sheet
dem shield plate with the screw "A". e with the screw "A".
ion sheet can result in fire
Confidential Confidential
ew to
rew to
n fire