Table of Contents
Advertisement
Installer manual Fleck 3150 NXT/NXT2 - Programming
1. Activate the relay with
2. Press
to validate the selection and advance to the next
parameter.
3. Set the relay activating volume with
4. Press
to validate the selection and advance to the next
parameter.
5. Set the relay activation duration with
6. Press
to validate the selection and advance to the next
parameter.
6.1.5.20 Flow meter selection
Select the size of the flow meter.
Info
This parameter is available only for volumetric valves.
This screen will only display on the lead (#1) unit for system types 6 & 7.
Options:
• 1.0" paddle (standard for 2750 valve series);
• 1.0" turbine;
• 1.5" paddle (standard for 2850 valve series);
• 1.5" turbine:
• 2.0" paddle (standard for 2900/2910 and 3150 valve series);
• 3.0" paddle (standard for 3900 valve series);
• generic meter.
1. Select the flow meter with
2. Press
to validate the selection and advance to the next
parameter.
Generic meter
Info
Only visible if "generic" was selected in flow meter selection.
Set the generic meter.
Info
This parameter has two settings.
The first display is to enter the maximum flow rate of the water meter.
The second display is to enter the values for the flow meter (pulses/volume).
86 / 190
and
.
,
and
,
and
and
.
Disabled.
.
Relay enabled every 20 litre.
.
Relay enabled for 1 min.
Ref. MKT-IM-010 / F - 16.01.2023
Advertisement
Table of Contents
