Table of Contents
Advertisement
Installer manual Fleck 3150 NXT/NXT2 - Programming
Parameter
CPO AUX RELAY
1 to 9'999
VOLUME
CPO AUX RELAY
00:00:00
TIME
to 02:00:00
FLOW METER
1.0" PADDLE
TURBINE
1.5" PADDLE
TURBINE
2.0" PADDLE
3.0" PADDLE
GENERIC
MAXIMUM FLOW
20 to 2'000
RATE
ADD XXX LITRES
EVERY YYY
PULSES
6.1.5.2
Entering master programming mode
1. Press
and
master programming mode.
6.1.5.3
Language
Select the displayed language.
Options:
• English (default);
• French;
• German;
• Italian;
• Spanish.
1. Select the language to be displayed with
2. Press
to validate the selection and advance to the next
parameter.
76 / 190
Options
Definition
1.0"
1.5"
1 to 255
XXX: number of litre/
YYY: number of pulses
simultaneously for 5 seconds to enter the
L
Only displayed if chemical pump is
enabled in previous screen.
Activate the relay output during a
Hour
service based upon the volume of
treated water. Relay is activated for a
set time after every set volume is
treated. Not compatible with auxiliary
relay activation.
Use the SHIFT button to move to the
left.
-
This parameter is only available for
volumetric valves.
-
Default flow meter type is based on
the valve type.
-
This screen will only display on the
-
lead (#1) unit for system types 6 & 7.
All other system types it will display
for all units.
-
-
-
l/min
Only displayed if "Generic" is chosen
for the flow meter.
Use the SHIFT button to move to the
left.
gallon
and
.
Note
Ref. MKT-IM-010 / F - 16.01.2023
Advertisement
Table of Contents
