Table of Contents
Advertisement
Parameter
Options
FEED WATER
1 to 1'999
HARDNESS
REGENERATION
OFF to 99
DAY OVERRIDE
REGENERATION
00:00:00
TIME
to 23:59:59
6.1.4.2
Language setting
Select the displayed language.
Options:
• English;
• French;
• German;
• Italian;
• Spanish.
1. Press
and
menus sequence.
2. Select the language to be displayed with
3. Press
to validate the selection and advance to the next
parameter.
6.1.4.3
Inlet water hardness
Set the inlet water hardness in the unit defined on chapter Display format [
1. Set the inlet water hardness with
2. Press
to validate the selection and advance to the next
parameter.
6.1.4.4
Regeneration days override
Set the maximum number of days that the valve is in service without regenerating, regardless
from the volume of water used.
Ref. MKT-IM-010 / F - 16.01.2023
Definition
Milligram CaCO
Day.
Hour
simultaneously for 5 seconds to enter the
,
Installer manual Fleck 3150 NXT/NXT2 - Programming
/L
This screen will only display on the
3
lead unit for system type 6. For all
other system types, it will display for
all units.
This screen will only display on the
lead unit for system type 6. For all
other system types, it will display for
all units.
Use the SHIFT button to move to the
left.
Regeneration time will not appear
unless regeneration day override is
on, or valve is programmed as time
clock or meter delayed.
and
.
and
.
Note
→
Page 80].
71 / 190
Advertisement
Table of Contents
