Table of Contents
Advertisement
Installer manual Fleck 3150 NXT/NXT2 - Programming
6.1.2
Commands
Info
At any time, press D to return to the home screen without saving.
Menus are displayed in a defined and incremental order.
If none of the buttons are pushed for 5 minutes in the Programming mode, or if there is
a power failure, the controller returns to Service mode without saving.
Mandatory
In order to store the new settings in the programming mode, it is necessary to go
through all the parameters !
1. Press
to pass to the next step.
2. Use
to move the cursor to the next digit.
3. Use
and to
4. Press D at any time to exit programming mode without saving.
6.1.3
Setting the time of the day
Set the time in the system.
Mandatory
In multiple valve systems, set the time of day on the lead valve (#1) !
The time of day will be automatically updated on the other valves in the system within
10 seconds.
Info
If, during time setting, no buttons are pushed for 5 seconds, the system leaves setting.
1. Press
or
2. Set the controller with
3. Press
to validate the selection and return to the service
mode.
6.1.4
Basic programming mode
6.1.4.1
Basic programming mode chart
Parameter
Options
LANGUAGE
ENGLISH
FRANCAIS
DEUTSCH
ITALIANO
ESPANOL
70 / 190
adjust the values.
for 2 seconds.
,
and
Definition
English
French
German
Italian
Spanish
.
Ref. MKT-IM-010 / F - 16.01.2023
Note
-
Advertisement
Table of Contents
