Installer manual Fleck 3150 NXT/NXT2 - System sizing
4.3
Salt amount definition
The salt settings are controlled through the controller programming. See Resin exchange capacity
and capacity of the unit [
4.4
Injector flow rates
The following graphics represent the injectors flow rate as a function of the inlet pressure for the
different injector sizes.
4.4.1
1800 Injector flow rates
40 / 190
→
Page 35].
INJECTOR 5
Inlet pressure [bar]
INJECTOR 6
Total
Rinse
Inlet pressure [bar]
Total
Rinse
Draw
Draw
Ref. MKT-IM-010 / F - 16.01.2023