Pentair Fleck 3150 NXT Installer Manual page 74

Installer manual Fleck 3150 NXT/NXT2 - Programming
Parameter
REMOTE SIGNAL OFF to 99
START minutes
DISPLAY
FORMAT GALLONS
EU-METRIC-
UNIT CAPACITY 1 to 198'000
CAPACITY
SAFETY FACTOR
FEED WATER 1 to 1'999
HARDNESS
TRIP POINT 1 1 to 3997
TRIP DELAY 1
TRIP POINT 2 1 to 3998
TRIP DELAY 2
TRIP POINT 3 1 to 3999
TRIP DELAY 3
REGENERATION OFF to 99
DAY OVERRIDE
74 / 190
Options Definition
OFF (default)
US- US units (default)
Metric units
LITRES
Gram CaCO
0 to 50
Milligram CaCO
30 to 99 Second
(30 seconds default)
30 to 99 Second
(30 seconds default)
30 to 99 Second
(30 seconds default)
This screen will not be displayed for
system type 14.
This screen will only display on the
lead (#1) unit for system types 6 & 7.
This screen will only display on the
3
lead unit for system type 6 if
%
programmed as volumetric. For all
other system type, it will display for
all units.
Use the SHIFT button to move to the
left.
/L This screen will only display on the
3
lead unit for system type 6 if
programmed as volumetric. For all
other system type, it will display for
all units.
Use the SHIFT button to move to the
left.
L/min This screen will only display for
system 14 and will only appear on the
master controller (Valve address #1).
Use the SHIFT button to move to the
left.
L/min This screen will only display for
system 14 and will only appear with
the system sized to 3 or 4 on the
master controller (Valve address #1).
Use the SHIFT button to move to the
left.
L/min This screen will only display for
system 14 and will only appear with
the system sized to 4 on the master
controller (Valve address #1).
Use the SHIFT button to move to the
left.
Day This screen will only display on the
lead unit for system type 6. For all
other system type, it will display for
all units.
Days between regenerations for
timeclock mode.
Note
-
Ref. MKT-IM-010 / F - 16.01.2023