Table of Contents
Advertisement
9.4.2.2
Valve with NXT2 controller
Caution - material
Risk of damage due to AC motor use !
Use only DC motor with NXT2 controller.
1. Using a flat screwdriver, unscrew (1) and open the cover (2).
2. Disconnect the motor (10).
3. Unscrew (8) and remove the micro-switches with their support (9).
4. Open the controller (7).
5. Using pliers, remove the retaining clip (3) and the circlip (5).
6. Remove the pin (4) and the plate (6).
7. Using pliers, remove the circlip (14) and the wheel (13).
8. Using a flat screwdriver unscrew (12).
9. Using a wrench, unscrew (11) and remove the motor (10).
10. Reverse above procedure steps to rebuild
Ref. MKT-IM-010 / F - 16.01.2023
Installer manual Fleck 3150 NXT/NXT2 - Maintenance
145 / 190
Advertisement
Table of Contents
