Samsung MC28A5025 Series User Manual page 71

Table of Contents

Advertisement

Information code
Check code
Cause
Temperature sensor is
C-20
needed to check.
Temperature sensor
detect higher
C-21
temperature than setting
temperature.
Control buttons are
C-d0
pressed over 10 seconds.
NOTE
For any codes not listed above, or if the suggested solution does not solve the
problem, contact your local SAMSUNG Customer Care Centre.
Action
Press the STOP/ECO button
and operate again. If it occurs
again, turn off the microwave
oven over 30 seconds and
try setting again. If it appears
again, call your local SAMSUNG
Customer Care Centre.
Turn off the microwave oven
for cooling the product and
then try setting again. If it
appears again, call your local
SAMSUNG Customer Care
Centre.
Clean the keys and check if
there is water on the surface
around key. If it occurs again,
turn off the microwave oven
over 30 seconds and try
setting again. If it appears
again, call your local SAMSUNG
Customer Care Centre.
Technical specifcations
SAMSUNG strives to improve its products at all times. Both the design
specifications and these user instructions are thus subject to change without
notice.
Model
Power source
Power
Maximum power
consumption
Microwave
Grill (heating element)
Convection (heating
element)
Output power
Operating frequency
Dimensions
Outside (Include Handle)
(W x H x D)
Oven cavity
Volume
Weight
Net
MC28A5025**
230 V ~ 50 Hz AC
2900 W
1400 W
1500 W
Max. 2100 W
100 W / 900 W - 6 levels (IEC-705)
2450 MHz
517 x 310 x 474.8 mm
358 x 235.5 x 327 mm
28 liter
17.50 kg approx.
English 71

Advertisement

Table of Contents
loading

Table of Contents