Table of Contents
Advertisement
Problem
Cause
The interior light is
The door has been left
dim or does not turn
open for a long time.
on.
The interior light is
covered by foreign matter.
A beeping sound
If the Auto Cook function
occurs during
is being used, this beeping
cooking.
sound means it's time to
turn over the food during
thawing.
The oven is not level.
The oven is installed on an
uneven surface.
There are sparks
Metal containers are used
during cooking.
during the oven/thawing
functions.
When power is
The door is not properly
connected, the oven
closed.
immediately starts to
work.
There is electricity
The power or power socket
coming from the
is not properly grounded.
oven.
Action
The interior light may
1. Water drips.
automatically turn off
2. Steam emits
when the Eco function
operates. Close and reopen
the door or press the
3. Water remains in
STOP/ECO button.
Clean the inside of the
The brightness inside
oven and check again.
the oven varies.
After turning over
the food, press the
START/+30s button again
Cooking is finished,
to restart operation.
but the cooling fan is
still running.
Make sure the oven is
installed on flat, stable
Turntable
surface.
While turning, the
Do not use metal
turntable comes out
containers.
of place or stops
turning.
Close the door and check
The turn table drags
again.
while turning.
Make sure the power and
power socket are properly
grounded.
The turn table rattles
while turning and is
noisy.
Problem
Cause
There may be water or
steam in some cases
through a door
depending on the food.
crack.
This is not an oven
malfunction.
the oven.
Brightness changes
depending on power
output changes according
to function.
To ventilate the oven, the
cooling fan continues to
run for about 3 minutes
after cooking is complete.
There is no roller ring,
or the roller ring is not
properly in place.
The roller ring is not
properly in place, there
is too much food, or the
container is too large and
touches the inside of the
microwave.
Food residue is stuck to the
bottom of the oven.
Action
Let the oven cool and then
wipe with a dry dish towel.
Power output changes
during cooking are not
malfunctions. This is not an
oven malfunction.
This is not an oven
malfunction.
Install the roller ring and
then try again.
Adjust the amount of food
and do not use containers
that are too large.
Remove any food residue
stuck to the bottom of the
oven.
English 69
Advertisement
Table of Contents
