Adjusting The Height; Setting The Print Head Height Manually - Roland EU-1000MF User Manual

Hide thumbs Also See for EU-1000MF:
Table of Contents

Advertisement

Adjusting the Height

Setting the Print Head Height Manually

Set the print head height manually so that the distance between the print head and the object to be printed on is
optimal. Manual setting is suitable for printing on soft objects and when you want to set a specific distance
between the print head and the surface of the object to be printed on. Set the distance between the print head and
the surface of the object to be printed on within the range from 0.8 to 2.0 mm (0.04 to 0.07 in.). A smaller value
decreases ink mist but increases the risk that the print head will contact the object to be printed on.
Procedure
MEMO
Check that the print-head carriage has returned to the maintenance station. If the machine detects an intrusion
into the movable range of the print-head carriage while the carriage is not in the maintenance station, safety
protection is activated to stop the machine.
"P. 20 "How to Clear Activated Safety Protection"
A
Measure the thickness of the object to be printed on using a measuring tape or vernier caliper.
B
Press [Z Axis] to display the [Z axis control panel] window.
C
Enter the print head height in [Medium positioning].
Set the print head height according to the thickness of the object to be printed on. Set a value derived by
adding 0.8 to 2.0 mm (0.04 to 0.07 in.) to the thickness of the object to be printed on.
1.Printing Operations
45

Advertisement

Table of Contents
loading

Table of Contents