Figure 42 Removing A Fan Tray - Nortel Contivity 5000 Installing

88 Chapter 4 Installing option cards and field replaceable units
To replace a fan tray:
1
2
3
4
5

Figure 42 Removing a fan tray

Rear chassis
315990-D Rev 00
Shut down the Contivity 5000 using the Web GUI or the command line
interface and then unplug it as described in
or replace hardware" on page
Danger: Turn off the Contivity 5000 and unplug it before you attempt
to replace a fan tray.
Remove the front bezel from the chassis, then remove the chassis from the
equipment rack (see
Remove the top cover from the chassis (see
cover" on page 64).
Attach the antistatic wrist strap that was shipped with the Contivity 5000 (see
"Attaching the antistatic wrist strap" on page
Locate the connectors on the system board where the two fan plugs for the fan
tray are attached (Figure
fans
Rear chassis
fan connectors
63.
"Removing the front bezel and top cover" on page
42).
Front chassis
1
2
6 4 /1
3
0 0
4
5
3 2 /3
3 6
6 4 /1
3 3
"Shutting down the system to add
"Removing the front bezel and top
68).
fans
Front chassis
fan connectors
64).
11049FA