Figure 40 Inserting A Hard Disk Drive - Nortel Contivity 5000 Installing

86 Chapter 4 Installing option cards and field replaceable units
7
8

Figure 40 Inserting a hard disk drive

9
10 If you shut down the gateway before you replaced the hard disk drive, press
11 Use your Web browser to navigate to the Contivity 5000.
12 Go to the Admin > File System screen and select the new disk drive from the
13 Click on the Enable button.
315990-D Rev 00
Insert the replacement hard drive into the chassis and push it all the way into
the chassis (Figure 40).
Insert the hard disk drive key into the lock and turn the key left
Make sure that the hard disk drive LED displays the drive number.
1
Replace the front bezel (see
a
Hold the bezel by its two handles and push it onto the chassis.
b Using the screwdriver, tighten the 2 screws to secure the bezel to the
chassis.
and release the power switch on the rear of the Contivity 5000 (see
on page 35) and wait for the gateway to boot.
Devices list.
2
Figure 30 on page
(Figure
11011FA
75).
Figure 8
40).