10 With two people facing the front of the equipment rack, set the Contivity 5000
11 Insert one of the 1/2-in. truss screws through the bottom hole on each side of
12 Replace the front bezel
Figure 30 Replacing the front bezel
Chapter 4 Installing option cards and field replaceable units 75
on the rack-mount shelf.
the shelf into the hole in the rack and tighten the screws (see
page
28).
a
Hold the bezel by its two handles and push it onto the chassis.
b Using a screwdriver, tighten the 2 screws to secure the bezel to the
chassis.
Press here
(Figure
30).
Figure 4 on
CS260005C
Installing the Contivity 5000