Leds On The System 10/100Base Ethernet Port; Figure 12 Leds On The System 10/100Base Ethernet Port; Table 7 Led Indicators On The System 10/100Base Ethernet Port - Nortel Contivity 5000 Installing

LEDs on the system 10/100BASE Ethernet port

Figure 12 shows the LEDs for the 10/100BASE Ethernet port located on the rear
of the Contivity 5000.

Figure 12 LEDs on the system 10/100BASE Ethernet port

10/100
Table 7 describes the LEDs on the system 10/100BASE Ethernet port.

Table 7 LED indicators on the system 10/100BASE Ethernet port

LED
10/100
Activity/Link
Chapter 2 Cabling the gateway and turning the power on 41
Activity/Link
CS260011A
Indicator Description
On The LAN port is operating at 100 Mb/s.
Off The LAN port is operating at 10 Mb/s.
On The cable connections between the LAN port and the
hub are good.
Flashing The LAN port is sending or receiving network data.
The frequency of the flashes increases with
increased traffic.
Off The cable connections between the LAN port and the
hub are faulty.
Installing the Contivity 5000