Figure 6 Replacing The Front Bezel - Nortel Contivity 1740 Installing

3
Insert one of the supplied panhead screws through the bottom hole on each
side of the shelf into the hole in the rack and tighten the screws (see
on page
4
Replace the front bezel
a
b Using the Phillips screwdriver, tighten the 2 screws to secure the bezel to

Figure 6 Replacing the front bezel

25).
(Figure
Hold the two handles on the bezel and push it onto the chassis.
the chassis.
Press here
Chapter 1 Installing the Contivity 1740 chassis 27
6).
Figure 4
CS260005D
Installing the Contivity 1740