Figure 3-14. Add Annex Dialog Box
3.
Type the name of the Annex or its IP address in the Annex Name
box.
4.
Change the Community String, Timeout and Retries settings if
necessary.
5.
Click on OK.
After it closes the dialog box, Quick2Config Annex establishes an
SNMP link to the Annex, determines the Annex model type and
reads the currently set Annex parameters. Quick2Config Annex adds
an icon for the Annex to the tree view and identifies the unit by name
and model number
Figure 3-15. Annex Icon and RA6300 Name
Installing Remote Annex Network Software for Windows
Chapter 3
(Figure
3-15).
Configuration Examples
3-17