Figure 3-21. Module Icon, IP Address, and Model Number
Setting Remote IP Addresses
When you select the 5399 RAC icon, Quick2Config displays a series of
window tabs for viewing and setting module parameters, including the
range of IP addresses to be used to by the 5399 RAC.
To set the remote IP addresses:
1.
Select the 5399 RAC module icon.
2.
Click on the Remote Address tab.
Quick2Config displays a window for entering the starting address in
the range of remote addresses
Installing Remote Annex Network Software for Windows
Chapter 3
Configuration Examples
(Figure
3-22).
3-27