Chapter 3
Configuration Examples
Installing Remote Annex Network Software for Windows
3-26
Accessing the 5399 RAC
To add the 5399 RAC:
1.
Open Quick2Config Annex.
2.
Choose File > Add Annex.
Quick2Config Annex opens a dialog box for identifying the module,
and specifying timeout and retry settings
Figure 3-20. Add Annex Dialog Box
3.
Type the name of the 5399 RAC or its IP address in the Annex
Name box.
4.
Change the Community String, Timeout and Retries settings, if
necessary.
5.
Click on OK.
After it closes the dialog box, Quick2Config Annex establishes an
SNMP link to the module, determines the model type and reads the
currently set parameters. Quick2Config Annex adds an icon for the
5399 RAC to the tree view and identifies the unit by name or IP
address, and model number
(Figure
3-1).
(Figure
3-21).