5.
Click on OK.
After it closes the dialog box, Quick2Config Annex establishes an
SNMP link to the Annex, determines the Annex model type and
reads the currently set Annex parameters. Quick2Config Annex adds
an icon for the Annex to the tree view and identifies the unit by name
and model number
Figure 3-2. Annex Icon, Name, and Model Number
6.
Click on the plus sign button to the left of the Annex icon to
display the current port configurations.
Quick2Config Annex expands the display and makes the Annex ports
available for selection
Figure 3-3. Expanded Annex Tree View
Installing Remote Annex Network Software for Windows
Chapter 3
(Figure
3-2).
(Figure
3-3).
Configuration Examples
3-3