Chapter 3
Configuration Examples
Installing Remote Annex Network Software for Windows
3-18
6.
Click on the plus sign button to the left of the Annex icon to
display the current channel configurations.
Quick2Config Annex expands the display and makes the PRI
channels available for selection
Figure 3-16. Expanded RA6300 Display
Configuring for Dial-in Clients
To configure the RA6300 so clients can dial in:
1.
Choose the Call Defaults tab.
Quick2Config displays a tab window for specifying mode and other
dial-in parameters
applied to all calls unless they are otherwise overridden by the
parameters configured in a Session Parameter Block.
(Figure
3-16).
(Figure
3-17). The Call Defaults parameters are