Procedure 76 Restoring, Deploying, And Starting Primary Network Elements - Nortel 5100 Supplementary Manual

2. Primary Session Manager
3. Primary Provisioning Manager (Restore and deploy only. Do not start
4. Primary IP Client Manager
5. Primary UFTP
Procedure 76
Restoring, deploying, and starting primary network elements
Step
1
2
3
4
5
6
7
8
9
10
11
Copyright © 2007, Nortel Networks
.
Restore, deploy, and start primary network elements 93
until the online Help upgrade is complete.)
Note: The primary Accounting Manager must be stopped before the
secondary Accounting Manager is started.
Action
Log on to the MCS Management Console as admin.
Expand the Network Elements folder.
Expand the folder for the type of network element you want to restore.
Expand the folder for the specific network element you want to
restore.
Click the Instance node.
Select an instance and click the Edit button.
Select a Base Load and click Apply.
Close the Instance window.
Click the NE Maintenance node.
Select an instance in the CONFIGURED state and click the Deploy
button.
When the instance deploys, the state changes to OFFLINE.
Select the instance and click the Start button.
When the instance starts, the state changes to ACTIVE.
Nortel Multimedia Communication Server 5100
MCS Upgrades—Maintenance Releases
NN42020-303 01.08 Standard
Release 4.0 10 August 2007
—End—