Extract the previous secondary load
Extract the previous load on the secondary System Manager Server.
Approximate time estimate = 5 minutes
In the following procedure <load_name> represents the name of
the load that you want to restore. The format of <load_name> is:
MCP_9.1.x.x_YYYY-MM-DD-HHMM.
Procedure 84
Extracting the previous secondary load
Step
1
2
3
4
5
Restore, deploy, and start secondary network elements
Restore, deploy, and start secondary network elements from the MCS
Management Console.
Restore, deploy, and start network elements on secondary servers in the
following order:
1. Secondary System Manager
2. Primary Accounting Manager
Copyright © 2007, Nortel Networks
.
Restore, deploy, and start secondary network elements 99
Action
Log on to the secondary System Manager Server as nortel.
Change the directory:
cd /var/mcp/loads/
Make sure that the required load exists:
ls
If the required load does not exist it must be copied to the
/var/mcp/loads directory.
Unzip the load:
unzip <load_name>.zip
Log off as nortel:
exit
Nortel Multimedia Communication Server 5100
MCS Upgrades—Maintenance Releases
NN42020-303 01.08 Standard
Release 4.0 10 August 2007
ATTENTION
—End—
ATTENTION