Nortel Callpilot; Meridian Mail To Callpilot Migration Utility Guide; Nn44200-502 01.02 Standard - Nortel Meridian Mail Utility Manual

102 Chapter 6 Performing post-migration tasks
5
VPIM network shortcuts
Configure VPIM network shortcuts for each system if MMNG or desktop
messaging is used. For instructions on configuring the VPIM network
shortcuts, refer to the CallPilot Manager online Help.
Users
Call Answering and message waiting indicator
Users can have mailboxes on CallPilot, Meridian Mail, or both. However,
only one system can accept Call Answering messages for each user.
Configure the user's telephone set to forward messages in busy or no
answer situations to the system designated as the Call Answering system
(for example, CallPilot) for that user.
Both systems can activate the message waiting indicator (MWI) on the user's
telephone set by specifying the MWI DN in the user's mailbox configuration
on each system. However, the users cannot determine on which system the
new messages arrived. Nortel recommends that you perform the following if
a user has mailboxes on both Meridian Mail and CallPilot:
•
Copyright © 2007, Nortel Networks
.
database at each remote site, before you add the CallPilot
system as a remote site.
The system using the "none" dialing plan needs a mailbox prefix
and a dialing prefix.
• The mailbox prefix distinguishes the CallPilot system from the
Meridian Mail system.
• The dialing prefix is required by the Call Sender feature and
remote users. Only one dialing prefix can be specified.
If multiple dialing prefixes are required (for example, multiple ESN
codes or multiple CDP steering codes with no overlap), specify in the
remote site configuration that mailbox addressing does not follow the
dialing plan. When mailbox addressing does not follow the dialing
plan, you cannot specify a dialing prefix.
Create remote user entries, as described in
on remote systems" (page 103)
feature to function properly.
Note: On Meridian Mail and MMNG, VPIM network shortcuts are
referred to as VPIM prefixes.
Configure the remote notification feature on the user's Meridian Mail
mailbox to send a message to the user's CallPilot mailbox, when a

Nortel CallPilot

Meridian Mail to CallPilot Migration Utility Guide

NN44200-502 01.02 Standard

5.0 17 April 2007
"Remote user entries
to allow the Call Sender and Reply
—End—