Adjusting The Contrast; Entering A Configuration Programming Session; Entering An Administration Session - Nortel Meridian Companion Installation And Maintenance Manual

9. Press CHANGE to search through the list of available languages. The last
value displayed is automatically set. (If this is the working language, the
change takes place immediately.)
To exit, press ® .
10.

Adjusting the contrast

If you find the Administration Terminal's display difficult to read, you can
adjust the contrast.
Note: This feature will not work while you are in a Configuration,
Maintenance, or Administration session.
Press ƒ•‡ . The display shows Contrast level followed
1.
by the current contrast level expressed as a digit.
2. Press a dialpad button between 1 and 9 to select a new contrast level, or
press DOWN or UP .
3. Press

Entering a Configuration programming session

Press ƒ••‚ .
1.
Enter the Installer password. The default password is ‚‚‚‚ (see
2.
"Changing passwords" on page 92).
If the password is correct, the display shows A. Configuration .
If the password is incorrect, the display shows Password: . Press RETRY
and enter the password again.
By using the arrow keys, you can select a programming category and find the
appropriate submenus for items you want to program.

Entering an Administration session

Press ƒ••· . The display shows Password: .
1.
Programming the Meridian Companion system Page 77 of 206
or ® to select the contrast level you prefer.
OK
Meridian Companion Installation and Maintenance Guide