Nortel Meridian Companion Installation And Maintenance Manual page 105

Programming the Meridian Companion system Page 95 of 206
Press ƒ••· . The display shows Password: .
1.
2. Enter the Administration password. The display shows
1. Registration .
Press * until the display shows 4. Passwords .
3.
Press ^ . The display shows Admin. password .
4.
Press * . The display shows Reg. password .
5.
6. Press CHANGE . The display shows New pswd: .
7. Enter a new one- to six-digit Registration password. Use BKSP for
corrections.
8. Press OK . The display shows Re-enter: .
Note: If you do not enter any digits and press OK , the display shows
Pswd not changed .
9. Reenter the digits and press OK . The display shows
Password changed .
If the display shows Pswd not changed , you did not enter the same
password again. Go back to step 6.
10. Record the new Registration password in Meridian Companion
Programming and Provisioning Record.
Press ® to exit or press * to continue in Administration
11.
programming.
Meridian Companion Installation and Maintenance Guide