Nortel Meridian Companion Installation And Maintenance Manual page 166

Page 156 of 206 Maintenance
553-3601-220 Standard 4.00 November 1998
6. Slide the old ROM card from the right-angled connector mate P2.
7. Slide the new ROM card into the right-angled connector mate P2 on the
CMCC.
8. Screw the new ROM card securely to the standoffs.
9. Reinstall the CMCC and reconnect faceplate cables.
10. Verify appropriate LED activity.
The Meridian 1 system indicates that card polling is reestablished with
the XMI002 LoopShelfCard.
Wait for the system LED on the CMCC to stop flashing.
11. Use the Meridian Companion Administration Terminal to verify that the
system is operating properly, that the ROM card software version is
correct, and that there are no unexpected alarms or events.
12. Reset the Meridian Companion time and date.
13. Enable the cards from the Meridian 1 side.
14. Verify operation using a portable telephone.