Figure 25 : P2 plug location
front
faceplate
LEDs
J2
5.
6.
7.
Figure 26 illustrates how the system looks after you have installed cards and
interboard faceplate cable harnesses.
CMCC component side
P2 connector
Fasten the ROM card securely to the standoffs.
Install the CMCC on the IPE Module. The CMCC must be located to the
left of any CMRC, CMLC or CMBC.
Connect the J1 plug of the last faceplate cable to the CMCC and verify
appropriate card LED behavior, as described in "Normal LED behavior
upon installation" on page 60.
Meridian Companion Installation and Maintenance Guide
Installing the hardware Page 67 of 206
backplane connectors