C3050 registration instructions using the Administration Terminal Page 7 of 10
5.
Displaying the C3050's wireless terminal number
When you register a portable, you assign it a WTN. If you register several
portables and forget which portable has which WTN, this procedure displays
the WTN.
1.
2.
3.
4.
5.
Measuring RSSI
The Receive Signal Strength Indicator (RSSI) is a measurement of the signal
strength the Base Station receives from the portable. The Base Station controls
the power transmitting mode of the portable. When the Base Station receives
a weak signal, it instructs the portable to transmit in high-power. When the
Base Station receives a strong signal, it instructs the portable to transmit in
low-power. The strongest RSSI value the display shows is - 35 dBm. The
weakest RSSI value the display shows is approximately -94 to - 100 dBm.
Measuring undirected RSSI
You can measure the signal strength between a portable and a system-selected
Base Station using undirected RSSI.
1.
2.
3.
4.
5.
Press OK . The display shows Deregistering... and then
Item erased. No system selected .
Open the portable's flap.
Press . The display shows MENU .
Press " or ' until the display shows Feature request .
Press SELCT . The display shows A- .
Press ° º . The display shows the WTN for 3 seconds.
Open the portable's flap.
Press .
The display shows
Press " or ' until the display shows Feature request .
Press SELCT . The display shows A- .
Press ° • ª • . The display shows the cell number, the
radio ID of the Base Station to which the portable is linked, the power
Meridian Companion Portable Telephone Registration Instructions
MENU.