Scheduling System Reevaluation - Nortel Meridian Companion Installation And Maintenance Manual

11. The display shows Re Eval complete when the reevaluation
procedure is completed. Press CLEAR to clear the message.
Note 1: You may receive alarm messages during this process, see
Note 2: Base Station download will increase the time by approximately 10
Approximate run times for System Reevaluation are shown in the following
table:
# Base Stations
>120

Scheduling System Reevaluation

You can view the scheduled time for System Reevaluation or schedule a time
to run System Reevaluation.
Verifying the scheduled time
Press ƒ••‚ and enter the Installer password. The display
1.
shows A. Configuration.
Press ^ . The display shows 1. Telephony Data .
2.
Press * . The display shows 2. Mobility Data .
3.
Press ^ . The display shows Re-Evaluation .
4.
Press ^ . The display shows Re-Eval status .
5.
"Responding to an alarm code" on page 139 for more information.
minutes.
Reevaluation run time (minutes)
20
40
60
80
100
120
Meridian Companion Installation and Maintenance Guide
Maintenance Page 143 of 206
6
14
19
23
28
32
>34