Programming The System Date - Nortel Meridian Companion Installation And Maintenance Manual

Press * . The display shows Minutes: . If you do not want to
7.
change the minutes, press * twice to continue in the
Administration session. To exit, press ® .
8. Press CHANGE . The display shows Minutes: .
9. Enter the minutes as one or two digits.
Press * . If the hour entered was less than or equal to 12, the
10.
display indicates AM or PM . Press CHANGE to select AM or PM.
Press ® to exit or press * to continue in Administration
11.
programming.

Programming the system date

Press ƒ••· and enter the Administration password. The
1.
display shows 1. Registration .
Press * until the display shows 3. Time and Date .
2.
Press ^ . The display shows Time and the current setting.
3.
Press * . The display shows Date and the current setting.
4.
5. Press CHANGE . The display shows Year: . If you do not want to change
the year, go to step 8.
6. Press CHANGE . The display shows Year: .
7. Enter the last two digits of the year.
Press * . The display shows Month: . If you do not want to
8.
change the month, go to step 11.
9. Press CHANGE . The display shows Month: .
10. Enter the month as one or two digits.
Press * . The display shows Day: . If you do not want to change
11.
the day, go to step 14.
12. Press CHANGE . The display shows Day: .
13. Enter the day of the month as one or two digits.
Press ® to exit or press * to continue in Administration
14.
programming,
Programming the Meridian Companion system Page 91 of 206
Meridian Companion Installation and Maintenance Guide