Nortel Meridian Companion Installation And Maintenance Manual page 191

Table 42 : Event messages in the Event/Alarm log (continued)
Event code
EVT850
EVT851
EVT882
EVT887-01091
Table 43 : Event messages in the Administration log
Event code
EVT220
EVT 400
EVT 412
EVT 413
EVT 414
EVT 415
EVT 416
EVT 417
EVT 419
EVT 434
EVT 440
EVT 450
You should rarely see event messages other than those described in Table 42
and Table 43. Other messages occur when the Meridian Companion system
has followed its normal recovery from an unusual combination of system
Synchronization error.
This is a Base Station software diagnostic message.
A reevaluation has been initiated. It precedes the Re-eval in prog alarm
in the Event/Alarm log.
The reevaluation radio configuration software has encountered a
problematic Base Station (on port 01091 in this case).
The Administration log has been cleared.
The system has been manually restarted.
The Installer password has been changed. The parameter contains the
extension number that changed the password.
The Administration password has been changed. The parameter
contains the extension number that changed the password.
Someone tried to enter the system with an invalid Installer password.
Someone tried to enter the system with an invalid Administration
password.
Someone has initiated a Configuration programming session.
Someone has initiated an Administration programming session.
The system time has been changed by a user.
The Registration password has been changed.
An invalid software code has been entered.
Someone has initiated a Companion Manager session.
Meridian Companion Installation and Maintenance Guide
Troubleshooting Page 181 of 206
Meaning
Meaning