Nortel Meridian Companion Installation And Maintenance Manual page 139

Table 34 : Card states and actions (continued)
State
Disabling
Failed
Unequipped
Busy
Wait Idle
Dsbl Sys
Dsbl User
Meaning
card is being disabled
TCM device has failed
No operational card is in this slot;
normally this appears only if the
slot is empty during a
disable/enable process.
card is in use
All idle WTNs and TCM devices
are immediately disabled;
remaining WTNs and TCM
devices will be disabled as soon
as calls terminate.
All card WTNs and TCM devices
have been disabled due to a
system detected exception.
All card WTNs have been
disabled by the user.
Meridian Companion Installation and Maintenance Guide
Maintenance Page 129 of 206
Possible action
TYPE
DSBL takes failed TCM device
offline and sets the state to
Use r; verify power and wiring
DSBL
^
to see the number of
^
busy WTNs,
*
to see the number of
TCM devices, , or
DSBL
to disable immediately;
DSBL
^
to see the number of
^
busy WTNs,
*
to see the number of
TCM devices; otherwise,
treat exception that caused
system to become disabled
ENBL to reenable, or TYPE
Dsbl
then
TYPE
then
TYPE