Nortel Meridian Companion Installation And Maintenance Manual page 29

Installing the hardware Page 19 of 206
Figure 7 shows a configuration that would be suitable for a system that has an
existing MDF. Typically the MDF is located in the same room as the
Meridian 1 system, although it could be a closet MDF. In either case the Base
Stations are wired through the MDF rather than the RPI unit.
Figure 7 : Base Station powering: RPI configuration option 2
Meridian 1
CMCC, CMRC or CMBC
TCM cable
RPI
RPI
MDF
output
main power
1-pair TCM wires
1- or 2- power pairs per Base Station
per Base Station
Base Stations
An illustration of an RPI unit appears in Figure 8. Figure 9 illustrates RPI
components.
Meridian Companion Installation and Maintenance Guide