Managing and Troubleshooting the Versalar Switch Router 15000
Topic (continued)
Using a Sun Workstation or PC to Display Packets
Converting a Packet Capture File to Network Associates Sniffer Format
Packet Capture Parameters
Before Running Packet Capture
Before running packet capture, consider the following:
•
Packet capture copies only packets that are error free.
•
Packet capture saves the MAC addresses in native media format.
•
Packet capture does not display frame check sequence (FCS) fields.
Using Packet Capture
Note: The following physical media services support packet capture on the
Versalar 15000: CSMA/CD, MCT3, Clear Channel T3, and ATM.
You can use packet capture to do the following:
•
Copy all incoming packets, outgoing packets, or both.
•
Filter and copy incoming packets, outgoing packets, or both.
•
Filter incoming packets, outgoing packets, or both, and copy only selected
contents of those packets.
The PCAP object resides in the following contexts:
•
ethernet
•
atm; pvc
•
atm; pvc-group; pvc
•
mct3; ft1; logical-line
•
mct3; ft3; t1
•
mcoc3; foc3; ft3; ft1; logical-line
8-2
Page
8-21
8-24
8-26
302768-C Rev 00