Warning Chimes And Warning Indicator; Disabling Keyless Access Function - Subaru Outback 2016 Manual

2-16
Keys and doors/Keyless access with push–button start system
. Lock or unlock using the following
items:
– The remote keyless entry system
– The power door locking switch
– The mechanical key (models with
double locking system)
. Open either of the front doors.
! Automatic locking (except models
with double locking system)
If any of the doors or the rear gate was not
opened within 30 seconds after unlocking,
they will be automatically locked again.
The function's operational/non-operational
setting and the time until automatic locking
takes place can be changed by a
SUBARU dealer. For more details, we
recommend that you contact a SUBARU
dealer.
& Warning chimes and warning
indicator
The keyless access with push-button start
system has a warning chime and the
access key warning indicator in order to
minimize improper operations and help
protect your vehicle from theft.
For details, refer to "Warning chimes and
warning indicator of the keyless access
with push-button start system" F3-27.
& Disabling keyless access
function
WARNING
If you wear an implanted pacemaker
or an implanted defibrillator, operate
the driver's door to disable the
keyless access function. Otherwise,
the operation of an implanted pace-
maker or implanted defibrillator may
be affected by the radio waves from
the transmitter antenna.
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, disable
the keyless access function.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. The setting can also be changed at
SUBARU dealers. For more details, we
recommend that you contact a
SUBARU dealer.
. To start the engine while the func-
tions are disabled, perform the proce-
dure described in "Starting engine"
F9-29.
. We recommend that you disable the
keyless access functions under the
following conditions.
– When the vehicle is not going to
be used for an extended period of
time
– When the keyless access func-
tions are not going to be used
! Disabling functions
! By operating the access key
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key. For details about registering a PIN
code, refer to "Registering a PIN code"
F2-19.
1. Open the driver's door.
2. Rotate the lock lever forward.