Multi Information Display - Subaru Outback 2016 Manual

3-40
Instruments and controls/Multi information display

Multi information display

WARNING
Always pay adequate attention to
safe driving when operating the
multi information display while the
vehicle is in motion. When operation
of the multi information display
interferes with your ability to con-
centrate on driving, stop the vehicle
before performing operations on the
screen. Also, do not concentrate on
the display while driving. Doing so
may cause you to look away from
the road and could result in an
accident.
Various information will be shown on the
multi information display. Also, a warning
message will appear on the display if a
malfunction, etc. is detected. In addition,
several settings for the displayed content
can be performed.
Multi information display
ECO gauge (refer to "ECO gauge" F3-
1)
13.)
Basic screen (refer to "Basic screens"
2)
F3-43.)
3) Cruise control information display
4) Select lever/gear position indicator (refer
to "Select lever/gear position indicator"
F3-33.)
SI-DRIVE indicator (refer to "SI-DRIVE
5)
indicator light (petrol engine models)"
F3-33.)
Telltale screen (refer to "Telltale screen"
6)
F3-42.)
Odometer (refer to "Odometer" F3-10.)/
7)
double trip meter (refer to "Double trip
meter" F3-11.)
Control switch
1) Up (select)
2) Set (enter)
3) Down (select)
NOTE
When the vehicle is in motion, certain
functions and selections may not be
available.