Subaru Outback 2016 Manual page 66

1-36
Seat, seatbelt and SRS airbags/Child restraint systems
1) Lock-off lever
8. Lock the child restraint system lock-off
lever to fix the shoulder belt.
1) Locking clip
9. If your child restraint system is not
equipped with a lock-off (a seatbelt locking
feature), secure the child restraint system
using a locking clip.
10. Before having a child sit in the child
restraint system, try to move it back and
forth and right and left to check that it is
firmly secured.
! Models with ALR
NOTE
If using ALR mode is not recom-
mended by the manufacturer's instruc-
tions supplied with the child restraint
system, use the lock-off lever or the
locking clip instead of using ALR
mode. In this case, refer to the previous
section "Models without ALR" F1-35.
Through the following steps, the child
restraint system is fastened by changing
the seatbelt from ELR mode to ALR mode.
1. Remove the head restraint of the rear
seating position where the child restraint
system is to be installed.
2. Store the removed head restraint in
the trunk (Sedan) or cargo area (Outback).
3. Place the child restraint system on the
seat.