Light Control Switch; Headlights - Subaru Outback 2016 Manual

Light control switch

CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch
is in the off position. If the vehicle
is left unattended for a long time
with the light control switch set
to a position other than the off
position, the battery may be dis-
charged.
Models with "keyless access with
push-button start system":
The light control switch operates when the
push-button ignition switch is in the "ACC"
or "ON" position.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the push-button ignition
switch is turned off.
Models without "keyless access with
push-button start system":
The light control switch operates when the
key is inserted in the ignition switch.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the key is removed from
the ignition switch.
NOTE
The light control switch can be oper-
ated (except auto on/off headlights),
even under the following conditions.
. when the push-button ignition
switch is turned off (models with "key-
less access with push-button start
system")
. when the key is not inserted into the
ignition switch (models without "key-
less access with push-button start
system")
If the driver's door is opened while the
headlights are illuminated under such
conditions, a chirp sound will inform
the driver that the lights are illumi-
nated.
Instruments and controls/Light control switch
& Headlights
Except Australia models
1) Second position
2) First position
3) Auto position (if equipped)
4) Off position
3-51
– CONTINUED –