To Set Double Locking System; To Cancel Double Locking System - Subaru Outback 2016 Manual

2-24
Keys and doors/Double locking system
& To set double locking system
! Setting system using key
1. Remove the key from the ignition
switch (models without "keyless access
with push-button start system")/turn the
push-button ignition switch to the "OFF"
position (models with "keyless access with
push-button start system") and have all
occupants get out of the vehicle.
2. Close all of the doors and the rear gate
(Outback) securely.
3. Insert the key into the key cylinder of
the driver's door, then turn it in the locking
direction to set the double locking system.
All of the doors and the rear gate
(Outback) will be locked.
! Setting system using remote trans-
mitter
1. Remove the key from the ignition
switch (models without "keyless access
with push-button start system")/turn the
push-button ignition switch to the "OFF"
position (models with "keyless access with
push-button start system") and have all
occupants get out of the vehicle.
2. Close all of the doors and the rear gate
(Outback) securely.
3. Press the " " button on the access key
or " " button on the transmitter. The
hazard warning flashers will flash once
and the double locking system will be set.
All of the doors and the rear gate
(Outback) will be locked.
NOTE
For models with the keyless access
function, it is possible to set the double
locking system by touching the door
lock sensor.
& To cancel double locking
system
! Canceling system using key
Insert the key into the key cylinder of the
driver's door, then turn it in the unlocking
direction to cancel the double locking
system. All of the doors and the rear gate
(Outback) will be unlocked.