Outside Mirrors - Subaru Outback 2016 Manual

NOTE
. Sensors are located in front of and
behind the mirror.
. Even with the mirror in the auto-
matic dimming mode, the mirror sur-
face turns bright if the shift lever/select
lever is shifted into the "R" position.
This is to ensure good rearward visibi-
lity during reversing.
& Outside mirrors
! Convex mirror
WARNING
Objects look smaller in a convex
mirror and farther away than when
viewed in a flat mirror. Do not use
the convex mirror to judge the
distance of vehicles behind you
when changing lanes. Use the inside
mirror (or glance backwards) to
determine the actual size and dis-
tance of objects that you view in
convex mirror.
! Remote control mirror switch
: Select side to adjust
: Direction control
The remote control mirrors operate only
when the ignition switch is in the "ON" or
"ACC" position.
1. Turn the control switch to the side that
you want to adjust. "L" is for the left mirror,
"R" is for the right mirror.
2. Move the control switch in the direction
you want to move the mirror.
3. Return the control switch to the neutral
position to prevent unintentional opera-
tion.
The mirrors can also be adjusted manu-
ally.
Instruments and controls/Mirrors
! Power folding mirror switch
Power folding mirror switch
The power folding mirror switch operates
only when the ignition switch is in the "ON"
or "ACC" position.
To fold the outside mirrors, press the
power folding mirror switch. To unfold the
mirrors, press the switch again.
NOTE
. When both of the following condi-
tions are met, the outside mirrors may
be adjusted automatically depending
on the status of the power folding
mirror switch.
– The outside mirrors have been
operated (folded or unfolded) manu-
ally.
– You turn the ignition switch from
– CONTINUED –
3-75