Talking On The Bluetooth Phone - Subaru Outback 2016 Manual

No. Function
Put the incoming call on hold. This
function may not work on some cell
&
phone models. This function is the
2
same as pressing the on hook switch
on the steering wheel for a short
period of time.
Open the call screen. This function is
&
the same as pressing the off hook
3
switch on the steering wheel.
Reject the incoming call. This function
&
is the same as pressing and holding
4
the on hook switch on the steering
wheel.
NOTE
. During international phone calls, the
other party's name or number may not
be displayed correctly depending on
the type of cellular phone you have.
. The incoming call display mode can
be set. Refer to "By incoming calls"
F5-51.
. Depending on the type of Bluetooth
phone, both the system and Bluetooth
phone may sound simultaneously
when there is an incoming call. Refer
to "Phone volume settings screen" F5-
56.
Audio/Phone operation (Hands–free system for cellular phones)
! By off/on hook switch
When you receive a call, you can also
answer it by pressing the off hook switch
on the steering switch. To end a call, press
the on hook switch.
& Talking on the Bluetooth
phone
The call screen opens when you perform
the following operations.
. When you accept a call on the incom-
ing call screen (by selecting the
the call screen opens.
. When you are on the outgoing call
screen, the screen changes to the call
screen when the other party answers the
call.
While talking on the phone, this screen is
displayed. The operations outlined below
can be performed on this screen.
. When the incoming call screen is
displayed and you accept the call, the
screen changes to the call screen. The
screen stays on the incoming call screen if
you reject the call.
. The
and keys are disabled on
the incoming call screen.
key),
Call screen
Call (Dialpad) screen (DTMF)
No.
&
Open the "Options" screen.
1
5-55
Function
– CONTINUED –